Stock/Order Number - 2568
Quick Draw 2 With Microprocessor Circuitry
The Quick Draw II is equipped with a powerful ZILOG Z-86 computer circuit which combines with Bounty Hunter’s Patented Technology to offer more features, performance and value than any other detector in its price range.
Whether sweeping the search coil ultra fast or ultra slow, the Quick Draw II will detect targets with tremendous accuracy.
8-INCH WATERPROOF COIL SYSTEM
Touch pad Selection with Four Modes of Operation
Has 3 Levels of Iron Discrimination. Tune out small nails, etc. and still detect larger relics and collectibles.
SPECIAL PRICE
GREAT FEATURES!
Target ID Depth Readout Full Discrimination Auto Notch Variable Notch Disc/Notch Level Control Low Battery Indicator 3-Tone Target Audio Auto Ground Balance 1/4-Inch Headphone Jack
5-YEAR LIMITED WARRANTY
QUICK DRAW II SPECIFICATIONS
On/Off Power/Sensitivity
After turning the Quick Draw on, by rotating the combination POWER/SENSITIVITY switch clockwise, the detector sounds three beeps while LCD arrows momentarily appear -- the detector presets to the ALL METAL/DISC mode of operation. SENSITIVITY is easily adjusted by turning the POWER SENSITIVITY switch clockwise for LOW.
Touch pad Operation Modes
PRESS FOR TARGET MODE
DISC NOTCH AUTO ALL NOTCH
With three types of Discrimination modes to choose from and an independent Motion All Metals operation, the Quick Draw II can be effectively used in many different ways. The DISC (Discriminate) Mode operates on the same touch pad as the ALL METAL mode. The position of the DISC NOTCH control will then determine the mode of operation. All modes can be fine-tuned by the DISC NOTCH control for a variety of specialized applications.
When pushing the DISC/ALL METAL touch pad, the mode of operation will be determined by the DISC/NOTCH control. To operate in DISC indication as shown. To operate in the ALL METAL mode, simply make sure that the control indicator is below the “DISC” indication.
The ALL METALS mode is operation by the DISC/NOTCH control. The level of ALL METALS may be adjusted within the parameters shown and will affect the detection of different sized iron objects (from small to large).
Weight: 3.5 lbs Operating Frequency (KHz): 6.6 Digital LCD Readout Low Battery Indicator (LCD) All Metal Motion (Auto Ground) 3-Tone Audio Discrimination 1/4” Head phone Jack Internal Speaker System 8” Open-Face Coil System Requires Two 9-Volt Batteries S-Rod Handle System Adjustable Aluminum Stem Limited 5-Year Warranty
Adjustment Controls Power On/Off Sensitivity Disc/Notch Control
Touch pad Controls Disc/All Metal Notch Auto Notch
The LCD Display emits “arrow” indications for the types of metal being detected. The general categories falls more common types of metal objects found when detecting. These indications may also symbolize many other types of precious metal objects such as gold rings, medallions, tokens, and relics.
The Probable Depth Indicator works simultaneous with the Target Identification-each arrow will lock on and stay on estimated depth is detected.
The 3-Tone Audio Discrimination is a valuable reference when trying to avoid digging trash items. With the external speaker or the use of stereo headphones, the detectorist always has a solid audio reference that, along with the Visual Target Identification, ensures ease of use in determining trash from treasure.
Special Features
8” SEARCH COIL: The Quick Draw II comes standard with the 8” Open-Face System. A versatile and deep-seeking coil that can be used effectively for all types of detecting. This coil may be submersed in water without any affect on the operation of the detector allowing for gold prospecting and shallow water hunting.
DEPTH CAPABILITY: The Quick Draw II was designed to integrate maximum depth capability with accurate performance. There are many factors that influence the depth of a metal detector. The most important include: ease of operation, soil conditions and type of coil. All three of these factors are mastered by the Quick Draw II.
S-ROD HANDLE SYSTEM: The Quick Draw II comes standard with an S-Rod Handle System -- an anodized black aluminum upper and lower stem that telescopically adjusts for most any height. Includes an S-Rod Stand for the convenience of placing the unit on the ground for hands-free digging, The forearm cup increases comfort while allowing for more control when swinging the search coil.
Bounty Hunter Quick Draw
2With Standard 8" Coil
Stock/Order Number - 1136
Australian Retail Price
AUD $ 425.00
For further assistance
Contact:- sales@finders.com.au
Phone: (03) 5468 1333
Fax: (03)5468 1130
...... To Order in Australia.
...... To Order outside Australia.
...... Exchange Rate Converter
...... To Have Salesperson Contact me.
...... Finders Catalogue
...... General Prospecting Supplies Page.
...... General Gold / Metal Detectors Page.