Minelab Explorer S

Finders is no longer an Authorised Minelab Dealer
Due to a difference of opinion between Minelab and Finders of which further details may be viewed at this page Minelab terminated Finders Authorised Dealership as of 1st. December 2000. Finders has now fast tracked their Titan Project.

Finders Stock Number  
Explorer S

The benchmark for Coin and Treasure Hunting detectors is about to change with the introduction of the new Minelab Explorer.

After two years of intensive research and development Minelab is proud to announce the release of two totally new and innovative detectors, which have been especially designed for the coin and treasure hunting market.

Following Minelab’s history in technological development, the Explorer introduces a new concept to the world of metal detecting. Within a short time, the Minelab Explorer will be the detector other treasure detectors are compared with.

Operating on a totally new system call Full Band Spectrum (FBS), this new technology transmits up to 28 frequencies simultaneously, ranging from 1.5 kHz to 100 kHz, improving both depth and accuracy of discrimination.

Welcome to the new world of Smartfind™.

The Explorer takes the old principals of how discrimination works and replaces it with the remarkable new technology called Smartfind™.

For the first time ever, here is a detector with 2-D Identification, which means that targets are now identified by not only conductivity but as well its ferrous content.

· Superior depth
· Large, easy to read display screens
· Targets can be identified three ways;
. 2-D graph (Smartfind™)
. Digital Meter
. Tone ID
· Target depth indicator
· Signal ‘blanking’ on discriminated targets
· Overload signal on large targets
· Option of Automatic preset factory controls or manual operation of controls
· Ergonomically designed for comfort
· Concealed coil cable (no more winding cables around shaft)
· Easy access, drop-in battery case
· Uses both Alkaline (8) or NiMh rechargeable batteries 
(which are not susceptible to failing capacity due to “battery memory”)
· Can be charged using either 240 volt or 12 volt charger
· Backlight and display screen contrast control
· Plus many more features

There are two models, the Explorer S and Explorer XS. Both detectors use the new Smartfind™ two-dimensional discrimination system and have equal depth. The Explorer XS however has a number of more advanced features which allows the operator to personalise the discrimination pattern to their requirements.

        
Model  Explorer S
Minelab Part Number 3218-0001